Launch X431 PRO MINI is a stylish Android-based vehicle trouble diagnostic tool. It inherits from LAUNCH's advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.
Oil Reset Service
Top Reasons to Get Launch X431 Pro Mini
1. Dealer Code: 755D (Register Device on Launch Official Website)
2. 2 Years Free Update Online (After 2 Years Free Update Expired, Update Cost 399USD/year, 599USD/two years.)
3. Global version, NO IP limited. You can use it and update it everywhere around the world
4. Software One-click Upgrade: Free Update online for 2 years
5. Multi-Languages: English, French, Spanish, German, Russian, Japanese, Portuguese, Korean, Italian, Polish, Dutch, Hungarian, Finnish,
Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional.
6. Wide Car Model Coverage: Support all ECUs of 12V EFI car models , covering more than one hundred car series and ten thousands of car models , support fault detection for most Asian , European , American , and domestic car ECUs , to realize full car model and system fault diagnosis.
7. Powerful Diagnostics with 11 Special Functions: Launch X431 Pro mini provides full system diagnostic; Oil Reset Service/Steering Angle Calibration/ Electronic Parking Brake Reset/ Battery Register/ Battery Maintenance/ ABS Bleeding/ Electronic Throttle Position Reset/ Learn/ DPF Regeneration/ Fuel Injector Coding. Diagnostic operations including Auto Scan, Manual Scan, General Diagnosis, Service, Data Logging.
Launch X431 Pro Mini Functions
All System Diagnosis
Launch X431 PRO MINI achieves full car model and full system vehicle trouble diagnosis, which includes Reading DTCs, Clearing DTCs, Reading Data Stream, Actuation Test , Special Functions and matching Engine system, steering system, SRS system, Security system, Air conditions system, brake system, battery system, EPB system, TPMS system, Chassis system, ABS system, transmission system.
Launch X431 Pro Mini Special Functions
Steering Angle Calibration
Electronic Parking Brake Reset
Battery Register / Battery Maintenance
Electronic Throttle Position Reset / Learn
Diesel Particulate Filter (DPF) Regeneration
Tire Pressure Monitor System Reset
Fuel Injector Coding
Add 5 More Reset Functions
You can check the 5 reset functions in the car diagnostic software.
1. Air Suspension Reset
2. Gearbox Reset
3. Sunroof RESET
4. AFS Reset (Adaptive Front lighting System)
5. EGR Reset
Bi-Directional / Active test: This diagnostic tool supports active test (Bi-directional control) to request information or command a module to perform specific tests and functions. such as turning the fuel pump on and off, cycling the a/c clutch on and off.
Key FOB Programming: Matching used to disable the lost vehicle keys and programing a new replacement key fob.
ECU Coding: Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH pro mini is equipped with advanced ECU coding function for addressing the following issues:
1. After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
2. ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
Launch X431 Pro Mini Vehicle Models List
Luanch X431 PRO MINI supports all electronic control systems on 12V EFI models, incl. more than 150 European, American and Asian models like Maserati, Ferrari, Rolls Royce, Bentley, Mercedes-Benz, BMW, Audi.Diagnose the electronic control system of prevailing vehicle models covering Asian, European, American and Chinese. It achieves full car model and full system vehicle trouble diagnosis.
What is the Different Between Launch X431 Pro Mini and X431 Pro
|| Car Brand
|| Car Brand
|| Car Brand
||Launch X431 Pro Mini
|| PROS(Free Upgrade for 2 years)
||1.3GHz Quad Core
||1.3 GHz Quad Core
||16GB (TF card 64g)
||8GB Expandable to 32G
||Online One-click upgrade
|| Online One-click upgrade
||Rear 500Mic+front 200Mio
||Rear 30Mio+front 320Mio
||USED as a pad
||Wide Coverage of Models
How to Register and Active Launch X431 Pro Mini
Tap “Login” on the upper right corner of the main menu screen:
If you are a new user, tap “New Registration”. See below picture.
Note: To obtain better service, you need to provide real information.
Create App account: fill in the information in each field and then tap “Register”, a screen similar to the following will appear:
Activate the VCI module
In the above figure, input the Serial Number and Activation Code, which can be found in the password envelope.
Note: To exit and activate it later, tap “Skip”. In this case, you can activate your connector by tapping “Activate Connector” in “Personal Center”.
Tap “Activate”, a dialog box pops up saying congratulations! You have successfully completed your registration; the next step is to download the diagnostic software
Launch X431 PRO MINI whole set: X-431 PRO MINI is mainly composed of an X-431 PRO MINI handset, and a DBSCar II VCI module.
Launch X431 Pro Mini Handset
1 VCI module
2 Reset hole
3 Rear camera
4 Camera flash
5 Slot for VCI module For housing the VCI module.
6 POWER/Screen lock key In Off mode, press it to turn X-431 PRO MINI on; In On mode, turn X-431 PRO MINI off with long press or lock screen with short press.
7 Carry strap
8 Air intake vent
9 USB/Charging port To connect to the power adaptor for charging.
11 LCD screen
12 VOLUME +/- Key To adjust the volume. To print the screen, hold and press the POWER and VOLUME – key until a snapshot pops up on the screen.
The captured snapshot is saved in the “Screenshots” folder.
14 Front camera
15 Earphone Jack
Launch X431 Pro Mini Technical Parameters
Operating system: Android 5.1
Processor : Quad core 1.3 GHz
Memory: 2 GB
LCD screen: 6.9 inch with a resolution of 1280 x 720 pixels
Camera : Front-facing 2MP camera + rear-facing 5MP camera
Battery : 3.7V/3000mh rechargeable polymer lithium battery
Connectivity : Wi-Fi: WLAN 802.11b/g/n ，Bluetooth: Bluetooth 4.1
Working temperature: 0℃ ~ 45℃
Storage temperature: -10℃ ~ 50℃
Working voltage 9 ~18V
Average working current About 85mA
Standby current About 55mA
Working temperature -10℃ ~ 55℃
Storage temperature -20℃ ~ 70℃
Relative humidity 20% ~ 90%
DBScar Ⅲ Adapter
Size: 69 × 40 × 18 mm
Operating voltage: 9V DC - 18V DC
Test voltage: DC12V
Typical power consumption: ≤2W
Bluetooth distance: 100 m
Connectivity: Bluetooth + wired
Operating temperature: -10℃to 50℃
Red Indicator: Turns red when connected to power supply;
blue Indicator: Turns blue then wireless Bluetooth work;
USB work: Turns green when the connector is connected to the USB cable
1pc x X-431 PRO MINI tablet
1pc x Password envelope
1pc x VCI module (For connecting OBD II vehicles)
1pc x OBD II extension cable
1pc x OBD I adaptor (For connecting the non-16pin diagnostic connector and the VCI module)
1pc x Battery clamps cable
1pc x Power adaptors
1pc x Non-16pin connectors (For connecting non-OBD II vehicle)
Launch X431 Pro Mini Reviews
Package came fast.Called the customers service for TECH support and I was asked to offer them the serial number, country and language I would be needed for using the tool.after activation and downloading the sofware, found it is really a multi-function device with a wide car coverage list.I applied it to my Porsche, and it accurately solved the oil indicator and cleared the DTC. I also used it to troubleshoot problems of my wife’s AUDI,couple of problems was found and fixed without issues.A good unit indeed.The seller was fairly supportive and the product good as well,I bet this product can at least save me $2000 plus time and labor per year. Highly recommend.
Launch X431 Pro Mini FAQ:
Question 1: Can this scanner program a new key?
Answer 1: Yes, this diagnostic tool can program a new key
Question 2: The caption says one year update and the description says two years. Most other sellers have two years of free updates. Which is offered here?
Answer 2: Dear sir, as for this diagnostic tool, we offer 2 years free update .
Question 3: Does this read obd 1 cars?
Answer 3: yes, it can compatible with obd1, there are some old connectors to fit obd1. and it covers many vehicles: BMW, Benz, GM, USA Ford, Chrysler, VW, Porsch, Toyota, Volvo, Audi, Acura, Changan, Daweoo, Gaz, Hafei, Huachen, Jiao, Lexus, Xiali, Xinkai, Fiat, Holden, Maruti, Opel, Peugeot, Saab, Ssangyong, Tata, Changhe, Flyer, GMSA, Infiniti, Mahindra, Perodua, Proton, Qirui, Tlisuzu, Zhongshun, EOBD2, Euroford, Jagar, Renault, Smart, Sprinter, VAZ, Changcheng, Dacia, Ford, HaoQing, Jinlong, Liuwei, Rover, ZhongTai, ZhongXing, Bxfiat, HM, Isuzu, Jacty, JPIsuzu, Mazda, Seat, Skoda, Suzuki, Daihatsu, Mitsubishi, Citroen, Hyundai, Kia, Lancia, Landrover, Nissan, Romeo, Subaru.
Question 4: How to handle when you encounter “Insufficient storage space”?
Answer 4: If this happens while downloading the diagnostic software, please proceed as follows:
1. Get your X-431 PRO MINI username and password ready. If you forgot thepassword, please dial our hotline to retrieve it with the product serial number 98539*******.
2. Reset the X-431 PRO MINI to the default factory settings (For details, please refer to Item 5 in this Chapter).
3. Tap “Settings” --> “WLAN”, choose the desired WLAN network to connect.
4. Open the browser and visit www.dbscar.com to download and install the latest App.
5. After the installation is complete, launch the application and login with your username and password.
6. Tap --> “Update” to download the diagnostic software.
Note: For new App, the software structure and storage space occupied by the vehicle softwares have been optimized so as to avoid the occurrence of insufficient storage.
Question 5: Why some videos on the website can be not played?
Answer 5: It possibly results from:
1. The current browser does not support Flash playing;
2. Flash player does not support this video.Try to use other browsers to watch it or install other Flash player.
Question 6: The date and time of X-431 PRO MINI cannot be set.
Answer 6: It is because Automatic date & time is set on your X-431 PRO MINI. Tap “Settings" --> “Date & time”, deselect “Automatic date & time” and then set the date and time manually. Since the diagnostic reports are saved and sorted by date, please make sure the system date and time is properly configured on this tool.