Creader Professional 129 is a highly cost-efficient small diagnostic device specially developed for car DIY lovers, small repair workshops and roadside concessions. Fashionable appearance, human-oriented operation interface and powerful function, all these make it possible to do maintenance and service anytime anywhere. The most attraction of Creader Professional is just about the X-431 classics.
LAUNCH Creader CRP129 Auto Code Scanner
Launch Creader crp129 features OEM enhanced functionality one might expect from a bigger scan tool. Functions include electronic parking brake release, steering angle reset and service reminder reset , not to mention the ability to display and graph live PID data for A/T, SRS, and ABS, along with complete generic OBDII. The tool includes quick boot up, manufacturer-specific code definitions, DTC-specific troubleshooter tips, free internet updates, and the ability to print via PC.
Top Reason To Get Launch CRP129:
1. Lifetime Free Update Online
2. Support 4 System Diagnose: Engine, Transmission, ABS, Airbag
3. Basic Diagnostic Function: Read DTCs, Clear DTCs, Read data stream
4. Multi-Language Supported: English/ French/ Spanish/ German/ Russian/ Japanese/ Portuguese
5. Support Multiple Car Models: covering over 40 prevailing models from Asia, America and Europe
1. Works on 12V vehicle battery ONLY;
2. Must be 16 PIN OBD II protocol.
3. No Battery in The Device, and you don't need to charge it. When you plug it into the car, it will work.
4. For transmission, ABS, and SRS (airbag) diagnostic, it only works with 2006 and newer OBD2 protocol vehicles
Launch Creader CRP129 Functions:
1.4 System Diagnostic
LAUNCH CRP129 is a must-have diagnosis tool for car enthusiasts which amalgamates the best features of code scanners and professional mid-line scan tools with extensive system coverage of most 2006 US/EU-based and newer vehicles, more than 40 brands including all CRP123 supported vehicles, plus Asian: Daewoo; American: EU-Ford; Europe: Alfa-Romeo, Citroen, Dacia, Lancia, Mini, Peugeot, Renault, Vauxhall. Moreover, CRP129 is a highly cost-efficient small diagnostic device characterized for the special design of adding benefits of reading/clearing error codes and reading DataStream for 4 following systems:
Transmission: Tests the Automatic Transmission (AT) which is a type of motor vehicle transmission that can automatically change gear ratios as the vehicle moves, freeing the driver from having to shift gears manually.
Engine: Easily determines the cause of Check Engine Light, and turn off the warning light.
SRS: Retrieves and clears codes in Supplemental Restraint System (SRS), and turn off the warning light.
ABS: Performs various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS), and turn off the warning light.
2. Tree Reset Functions
Oil Maintenance Reset: This function allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depend on the vehicle driving conditions and climate, and to turn off the warning light. The Oil Life Reminder must be reset every time the oil is changed, so the system can calculate when the next oil change is required.
EPB Reset: Reads and clears Electronic Parking Brake (EPB) trouble codes and turns off the ECU and brake warning light. If the brake pad wears the brake pad sense line, the brake pad sense line will send a signal sense line to the on-board computer to replace the brake pad. After replacing the brake pad, you need to reset the brake pad to clear the car alarms.
SAS Reset: Calibrates the Steering Angle Sensor (SAS) after the replacement. The steering angle sensor is a critical part that measures the steering wheel position angle and rate of turn. The SAS requires a reset to ensure proper calibration for adjusted alignment at any time for any reason.
3. OBD2 Diagnoses
Live Data: Shows the information of continuous data stream from vehicle in live graphic (waveform) display.
Freeze Frame: Checks the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Shows the last results of O2 sensor test in graphic display for troubleshooting.
On-Board Monitor Test: Reads the results of on-board diagnostic monitoring tests for specific components/systems.
DTCs Read & Clear: Shows the detailed description of the current Diagnostic Trouble Code (DTC) and clears/resets the diagnostic information.
Read Vehicle Information: Displays the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
I/M Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
And much more …
LAUNCH CRP129 code reader supports 43 (more than CRP123 supported vehicles) brands of Asian, US and European vehicles, including SUZUKI, INFINITI, GM, USAFORD, MAZDA, EUROFORD, CHRYSLER, JAGUAR, VOLVO, RENAULT, TOYOTA, DAEWOO, JPISUZU, ACURA, OPEL, LANDROVER, SAAB, DACIA, BENZ, LEXUS, ROMEO, FIAT, VAUXHALL, LANCIA, SEAT, VW, PEUGEOT, CITROEN, SKODA, HYUNDAI, MITSUBISHI, PORSCHE, SUBARU, SPRINTER, AUDI, HONDA, BMW, KIA, MINI, NISSAN, SMART, AUSTFORD, HOLDEN.
How to Update This Tool?
There are two methods to update this tool. We would recommend method 2 (Via TF card) which is more accessible than method 1(Via USB cable).
Step 1: Go to LAUNCH official website(refer to the manual) and click Updating Tool Download icon.
Step 2: Download and install the CRP129 update tool and launch the program when installed.
Step 3: You will be prompted to type in the serial # (located on the back of the tool)
Step 4: Hit [Device Upgrade] to enter the register page, type your email info (check the "Register Code" on the device menu "Help--Tool Information" ).
Note: the “User password” is equal to the “Register Code.”
Step 5: Install the TF card from the tool into the supplied USB TF card adapter and insert into USB port of CPU.
Step 6: Reopen the CRP update Suite and select the updates you would like to preform or click select all and click Download.
Step 7: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.
Launch Creader CRP129 Parameters:
2、Voltage Input: 9-15V
3、Connection: Standard 16PIN OBD Diagnostic Interface
4、Working Temperature: -0℃~55℃
5、Storage Temperature: -20℃ ～ 70℃
1pc x LAUNCH Creader CRP129
1pc x Diagostic OBDII CABLE
1pc x USB Charging Cable
1pc x U disk
WhatsApp/Wechat: +86 13983755934Online chat with us to get faster support